The Redback A4017 is a stand-alone Public Address (PA) Amplifier that will suit any 12v vehicle. MADE IN AUSTRALIA with 10 year manufacturers warranty!
Optional Add-Ons:
- Plug-in hand-held microphone with 4.5m lead ($50 add-on, usually $59+freight) Email us BEFORE ORDERING.
- To order the Redback PA Amp WITH the Dynamic Headset Mic PLEASE SELECT ITEM SKU 2021 sand SAVE $19.95!
Add-ons cannot currently be purchased via the website at the discounted freight-free prices.
If you email us, Add-Ons will be discounted and will not incur extra freight. So, make sure you email info@megaphonesplus.com.au prior to purchase and we will send you an invoice.
NOTE: If your existing stereo system has EITHER a 3.5mm socket marked as “Aux In” or “MP3”, OR *has an unused pair of RCA Inputs on the rear*, then ask us about our Driver-Mic tour bus headset microphone at just $169 delivered, (*or $179 delivered if you use the RCA inputs) and no need for the A4017 amplifier!
However, the Driver-Mic can also be used with the 4017 PA using the Aux/Music Input socket or using the RCA inputs on the rear, enabling a non-driving tour guide to speak as well as the driver.
NOTES
This PA should be installed by a qualified installer, especially if you intend to use the existing speakers, to prevent overloading the output stage of both PA and Stereo system units, which would void both warranties.
This PA system requires that the impedance of the speakers must total no less than 4 ohms, and no more than 16 ohms. Regardless of whether or not you are planning to use your existing speakers, it is imperative that you know the total speaker impedance. Note: This is NOT as simple as adding up the “Ohms” as indicated on the back of your speakers. It depends on whether your speakers are wired in Series or wired in Parallel. If you don’t know, then get an auto-electrician to advise.
Our recommendation would be to use different speakers for the Stereo system and the PA system, so as to avoid any impedance-related issues.
This PA does NOT come with under-dash fitting provision. We suggest mounting using Velcro onto the dashboard or parcel tray or other surface. Drilling holes into the amplifier case will VOID the manufacturers warranty.
Questions? Email us info@megaphonesplus.com.au
